Axial SCX10-2 Deadbolt - RTR
Brand: Axial
Part No: AX90066
SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.
Why not contact our team to see if an alternative is available?
Key Features
- Chassis: Scale steel C-channel side rails with adjustable body mount, adjustable bumper mounts with swaybar mounting points, mounting points for optional 2-speed and servo winch, adjustable chassis mounted servo system
- Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar driveshafts with updated design with a larger diameter crosspin (2x11mm) with an M4 screw shaft (2mm hex drive) for added strength center splined slider floats between each end with added material that reduces flex and fatigue
- Transmission: AX10 three gear layout, metal motor plate, adjustable ratio for high speed or competition level crawling speed, 20T metal drive gear, plastic idler and lower gear, optional all metal gear set is available, AX31585, better mounting points at base of transmission-no more stripped screws
- Slipper Clutch: Dual pad design for added surface area, 32P gear pitch for high-torque applications
- Motor: 35 turn, brush equipped, water resistant, integrated cooling fan
- Radio: Tactic TTX200 2-channel transmitter with TR325 3-ch Receiver,
- Receiver Box: Waterproof with separate silicone seals for antenna, servo wires and gasket for receiver box cover, receiver box located on side plates for easy access and low center of gravity
- ESC: AE-5 waterproof, switchable between LiPo or NiMH operation with a simple jumper-jumper 1 provides simple plug and play choice between LiPo or NiMH, jumper 2 switches Drag Brake settings, waterproof design with Star plug battery connector,
- Spur Gear: 56T 32-pitch, plastic construction Pinion Gear 15T 32-pitch, steel construction
- Battery Tray: Easy access front mount, adjustable, accomodates batteries up to 1.2 x 1.7 x 5.8" (32x44x147mm) 3S, 5000mAh
- Front and Rear Axles: Hardened steel
- AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized gear ratio for reduced torque twist, optional gearing choices, one- piece axle housing, increased clearance, larger load rated bearings for durability, 8° kingpin axle eliminates tire scrub, single piece axle housing, one-piece all metal locker, 10° increment adjustments for knuckle carriers and straight axle adapters, optimized gear ratio; 3.75 compared to 2.92 previously, for less torque twist
- Body: Trimmed and painted olive in color, dashboard, driver figure plastic rollbar cage with light bar (lights not included)
- Wheels: Method Hole wheels, molded composite 1.02" (26mm) wide, 2.12" (53.9mm) construction, black in color, 12mm hex
- Tires: 1.9" Nitto Trail Grappler M/T, S30 compound with large blocks for excellent bite in all terrain 4.7" (119.4mm) 1.9" (48.2mm) wide
- Shocks: Coil over, oil filled, steel springs, white in color, multiple mounting positions
- Front Bumper: Rigid plastic
Needed to Complete
- 6-cell NiMH or 2-3S LiPo
- Suitable Charger
- Building and track equipment
What's in the box?
- (1) RTR SCX10 II Deadbolt 4WD with Oil-Filled Shocks, Wheels, Tires, Painted Body, Radio, ESC, Motor, Decals, Waterproof Receiver Box, Light Bar (lights not included)
- (1) User Manual
Specifications
Vehicle
- Length: 18.1" (460mm)
- Width: 8.8" (225mm)
- Height: 9.0" (229mm)
- Wheelbase: 12.0" (305mm), optional link kit allows wheelbase adjustment to either a 11.4" 12.0" or 12.3" wheelbase
- Ground Clearance: 2.7" (68mm)
- Weight: 4.65lbs (2.1kg) approximately, with electronics
- Optimized Gear Ratio: 3.75:1
- Final Drive Ratio (FDR): 42.00, stock (33.69-54.15 with different spur/pinion gear combinations, extra spur and pinion gears must be purchased separately)
- Adjustable Battery Tray Dimensions: 5.75 x 1.2" (147 x 32mm)
Body
- Length: 17.5" (444mm)
- Width: 6.25" (159mm)
- Height: 6.4" (162mm) bottom of body to top of roll cage 3.3" (84mm) bottom of body to top of driver's door
Axial Scx10 II Deadbolt 4Wd 1:10 RTR Specfications:
- Body: Pre-painted
- Completion Level: Ready-To-Run
- Drivetrain: 4WD
- Ground Clearance: 2.7 in (68mm)
- Height: 9.0 in (229mm)
- Length: 18.1 in (460mm)
- Motor Size: 35T
- Motor Type: Brushed
- Radio: Tactic TTX200 2-CHANNEL SLT RADIO, 2.4GHz
- Servos: Tactic TSX45 Servo. Torque: 6.0V 151 oz-in, 4.8V 143 oz-in
- Size/Scale: 1/10
- Speed Control: AE-5, forward/reverse, drag brake, 3S LiPo compatible, waterproof
- Tire Compound: S30
- Water-Resistant: Yes
- Weight: 4.65 lb (2.1 kg)
- Wheel Diameter: 1.9
- Wheelbase: 12.0 (305mm)
- Width: 8.8 in (225mm)
Secure Payments
Secured by Stripe
- Brand: Axial
- Part No: AX90066
- Barcode: 816874017415
- Scale: 1:10
- Build Level: Assembled (RTR)
- Power Source: Electric - Brushed
- Surface Type: Off Road
- Vehicle Type: Rock Crawler
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
All reviews are subject to moderation
No questions yet, why not ask one?
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.

























































Spektrum Smart LiPo - 5000Mah 2S 7.4V 30C - IC3
5000mAh 2S 7.4V 50C Smart LiPo Hardcase IC3
Spektrum XBC100 Smart Battery Checker And Servo Tester
Axial Screw Shaft M4x2.5x12mm (6pcs)
1.9 MW19 Beadlock Wheels - Gray (2) ** CLEARANCE **
Axial Pin 2.0x10mm (6pcs)
ProLine Pro-Spec Scaler Shocks 90-95mm 1:10 Crawlers F/R
ProLine Class 1 BFG Krawler T/A KX Predator F/R 1.9 Crawler Tyres (2)
Axial 1.9 Falken Wildpeak M/T - R35 Compound (2)
Axial EU Slipper Pad - 32.8 x 15.2 x 1mm
Axial Hub Cover Set - Satin Chrome (4)
Axial UMG10 Grille Set
Axial Velcro Strap 15x160mm
ProLine Interco Bogger 1.9 G8 Rock Terrain Truck Tyres
ProLine Mickey Thompson Baja Pro X 1.9 G8 Tyres - Mounted On Black Holcomb Wheels (2)