4.9from 6,174 reviews

Stampede 4X4 Brushless (67154-4) Rear Assembly exploded view

Tap or click a part number on the diagram to see that part and add it to your basket. All 75 parts we list from this diagram are below it.

6 diagrams for this model: choose one

Parts in this diagram

Back in Stock

Back in Stock

Back in Stock

Ships next day

Back in Stock

Back in Stock

Ships next day

Back in Stock

Ships next day

Back in Stock

Ships next day

Ships next day

Ships next day

Ships next day

Ships next day

Ships next day

Ships next day

Ships next day

TRX9072-GRAY

Ships next day

Ships next day

TRX9039-GRAY

Ships next day

TRX9050-GRAY

Also on this diagram, not available from us: TRX9050. Ask us if you need one of these.

Your Cart: £0.00

Stampede 4X4 Brushless (67154-4) Rear Assembly exploded view

Parts in this diagram

Traxxas Ultra Shock rebuild kit (for 2 Shocks)

Traxxas Shock shafts steel chrome finish (xx-long) (2)

Traxxas Washers 3x6mm metal (12)

Traxxas Shock caps (2)/ Shock bottoms (2)

Traxxas Rebuild kit GTR Shock (x-rings bump stops bladders all pistons piston nuts Shock rod ends) renews 2 Shocks

Traxxas Screw pins, 3x16mm, extreme heavy duty (6) (for use with 9080 upgrade kit)

Traxxas Silicone diaphragms (4)

Traxxas Piston head set (2-hole (2)/ 3-hole (2)/ Shock mounting bushings washers (2) (Big Bore Shocks)

Traxxas Spring retainers upper lower (2)/ piston head set (2-hole (2)/ 3-hole (2)

Traxxas Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)

Traxxas Housings differential rear

Traxxas Shock caps (black) (4) (assembled with hollow balls)

Traxxas 12mm Extreme Heavy Duty Wheel Hex Hubs (4) With 2x9.8mm pins (4) For Use With TRX9080 Upgrade Kit and 6mm Axles

Traxxas Carrier differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

Traxxas Suspension pin set, extreme heavy duty, complete (front and rear) (3x52mm (4), 3x32mm (2), 3x40mm (2) (for use with 9080 upgrade kit)

Traxxas Ring gear differential/ pinion gear differential (rear)

Traxxas Stub axle pins (4)

Traxxas Bulkhead tie bars front rear Aluminium (blue-anodized)

Traxxas Bulkhead rear

Traxxas Hoss Main Chassis

Traxxas Bumper, Rear / Bumper Mount, Rear / Bumper Support, Rear

Traxxas Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with 9080 upgrade kit)

Traxxas Springs rear (white) (2)

Traxxas Hardened Steel Titanium Nitride-coated Shock Shafts (xx-long)

Traxxas Body Ultra Shock(s) (XXL) (grey) (2)

Traxxas Rod Ends short (6)/ hollow balls (6)

Traxxas Gear set differential (output gears (2)/ spider gears (2)/ spider gear shaft carrier support)

Traxxas Carriers, stub axle, rear, extreme heavy duty, blue (left + right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with 9080 upgrade kit)

Ball Bearings Rubber Sealed (6x12x4mm) (2)

Ball Bearings Black Rubber Sealed (12x18x4mm) (2)

Traxxas Shock tower, rear, extreme heavy duty, blue (for use with 9080 upgrade kit)

Traxxas Suspension pin set complete (front and rear)

Traxxas Shoulder screws Ultra Shocks (3x12 hex drive) (6)

Traxxas Differential, Rear (Complete With Pinion Gear And Differential Plastics) (fits 1:10 4X4 Slash, Stampede, Rustler, Rally)

Traxxas Screws 2.5x8mm cap-head machine (6)

Traxxas Sledgehammer TSM Rated Tyres Pre Glued on 2.8 Black Wheels - 1 Pair

Traxxas Sledgehammer TSM 2.8 Tyres Pre Glued on Black Chrome Wheels (2)

Traxxas Nuts, 4mm nylon locking, black (10)

Screws - 3x12mm countersunk machine (6) (hex drive)

Screws - 3x10mm button-head machine (hex drive) (6)

Traxxas Screws 3x15mm button-head machine (hex drive) (6)

Screws - 3x20mm button-head machine (hex drive) (6)

Traxxas Shock tower, rear, extreme heavy duty, black (for use with 9080 upgrade kit)

Traxxas Screws 3x10mm countersunk machine (6) (hex drive)

Traxxas Screws 4x12mm button-head machine (hex drive) (6)

Traxxas Springs rear (green) (2)

Traxxas Springs rear (pink) (2)

Traxxas Springs rear (red) (2.9 rate) (2)

Traxxas Screws 4x18mm button-head machine (hex drive) (6)

Traxxas Screws 3x30mm button-head machine (hex drive) (6)

Traxxas Carriers, stub axle, rear, extreme heavy duty, orange (left + right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with 9080 upgrade kit)

Traxxas Camber link set (plastic/ non-adjustable) (front +rear) (black)

Traxxas Bulkhead tie bars front rear Aluminium (green-anodized)

Traxxas Bulkhead tie bars front rear Aluminium (red-anodized)

Traxxas Ring gear differential/ pinion gear differential (machined spiral cut) (rear)

Traxxas Shock tower, rear, extreme heavy duty, green (for use with 9080 upgrade kit)

Traxxas Shock tower, rear, extreme heavy duty, red (for use with 9080 upgrade kit)

Traxxas Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2)/ M2.5x0.45mm NL (8) (for use with 9080 upgrade kit)

Traxxas Carriers, stub axle, rear, extreme heavy duty, green (left + right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with 9080 upgrade kit)

Traxxas Carriers, stub axle, rear, extreme heavy duty, red (left + right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with 9080 upgrade kit)

Traxxas M4 Flanged Nylon Locking Nuts - Serrated Green Aluminium (4)

Traxxas Blue Anodised Aluminium M4 Nuts - Flanged Nylon Locking Serrated (4)

Traxxas Shock tower, rear, extreme heavy duty, orange (for use with 9080 upgrade kit)

Traxxas Ball bearings rubber sealed (5x11x4mm) (2)

Traxxas Tyres + wheels, assembled, glued (charcoal gray 2.8 wheels, Sledgehammer Tyres, foam inserts) (2) (TSM rated)

Ball Bearings - Rubber Shielded (8x16x5mm) (2)

Traxxas Driveshafts, rear, extreme heavy duty, steel-spline constant-velocity with 6mm stub axles (complete assembly) (2) (for use with 9080 upgrade kit)

Traxxas Ball bearings blue rubber sealed (10x15x4mm) (2)

Ball Bearings - Rubber Shielded (12x18x4mm) (2)

Traxxas Washer PTFE-coated 6x9.5x.5 (10)

Traxxas PTFE-coated washers 5x8x0.5mm (20) (use with ball bearings)

Traxxas Shock tower, rear, extreme heavy duty, gray (for use with 9080 upgrade kit)

Traxxas Carriers, stub axle, rear, extreme heavy duty, gray (left + right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with 9080 upgrade kit)

Traxxas M4 Flanged Nylon Locking Nuts - Serrated Black Steel (10)

Traxxas M4 Nuts - Flanged Nylon Locking Steel Serrated (8)

More diagrams for this model